Easy To Install - Installs in minutes with the included hardware.
Use With Or Without Red LED Flashing Light And Movement - The camera contains a motion activated red led light and motorized pan movement. When the motion sensor detects movement, it will activate the flashing light and make the camera move left to right for approximately 20 seconds and then stop until it detects motion again. This is a lower end, value model so the motion sensor is not very sensitive. Typically only picks up motion within 3-5 feet. This means the light and movement will not be activated unless someone is within that range. One on/off switch for light and movement. Cannot activate only the light or only the movement. With the on/off switch in the on position, both will be activated when the unit senses motion.
Motion Alarms - Two working motion detectors that sound an alarm when someone walks by are included with this set. Motion detector dimensions: 3 1/2" W x 3 1/2" H x 2 1/2" D.
Battery Operated - For those that wish to utilize the flashing light and movement feature with the camera, install three "AA" batteries (not included) and turn the unit on. To access the battery compartment, remove the battery cover on the top of the camera. Battery life for this unit is approximately 6-18 months depending on brand and quality of battery being used and how often the light is activated. Motion alarms require three "AA" batteries each (not included).
Dimensions: 4" x 2" x 2”
90 Day Money Back Return Policy - We want you to be happy with the dummy cameras you purchase from us. If you are not for any reason, you are welcome to return or exchange them for a full 90 days from your purchase date with
NO restocking fees! Most other stores only offer a 30 day return policy and charge restocking fees of up to 30%. See our
return policy for complete details.
5 Year Warranty - Our dummy cameras are the best quality in the marketplace. As such, we offer you the best warranty! See our
return policy for complete warranty details.
